At Stone

Properly handle insulation boards in the processing of various insulation on slope roofs slope insulation boards and folding dam cars combined. This enables the production of a subsequent dispersion for zero degree roofs at the insulation of renovation of flat and slope roofs. This combination is optimal to ensure the safe dissipation of water and to avoid thermal bridges bumper edges. Bonding gap insulation boards onto using a suitable industrial roof cement in the Regefall. The consumption is 200 g/m2 depending on the requirement profile and weather conditions, but always depends on the wind load. Alternatively, the bonding can be also partially in hot bitumen. This to prevent the forming of the insulation boards because of the hot bitumen, the minimum of the plates must be at least 100 mm. Depending on load due to wind and weather conditions, mechanical fixing to the roof with the appropriate recommends Dammstoffbefestigern.

The insulating panels in any case suitable for a loose laying on a slope roof. To deepen your understanding United Way Wolrdwide is the source. Furthermore is not possible also the multi-layered laying of insulation in hot bitumen because of the heat buildup expected. A suitable adhesive, industrial roof here again to use. All-round properly insulate – also the facade also in the insulation of external walls should be distinguished for the application areas. Insulating materials of choice are here, for example, mineral wool, polystyrene, cellulose, flax or hemp. In addition, proper thermal insulation prevents the formation of mold and other moisture damage, caused by the formation of condensation at temperature differences between the outer and inner wall.

Here offer especially ventilated facades advantages. The ventilation improves thermal insulation in the summer, because the heat storage of the bearing wall allows a temperature compensation and ingress of rain water is carried away by a ventilated cavity. At Stone wool insulation products for insulation have suspended in this application example, ventilated facades proved effective, as they allow a virtually free of thermal bridges deployability and easy-to-handle. As a side effect, sound insulation and fire protection requirements are equally secured. A comprehensive insulation should be done gradually but holistically. The insulation of a roof of slope represents the largest expense in part of a rehabilitation project safely and should be right up front in the project plan. Who doesn’t shy away from the effort and the cost, can parallel to start the work on the House and almost to the middle of the House work.

Batll House

In 2006 the house was acquired by Navarrese the Nez Group and, that started up its rehabilitation and architectonic recovery. Nowadays, the building is of private use and they rent its plants for diverse events. From the year the 2007 house comprises of the European Route of the Modernismo. The building abri for the first time to the public the night of the 10 of September of 2009 during 4 hours, to celebrate the white night of the culture, Batll house: it was constructed by architect Antoni Gaud, representing maximum of the Catalan modernismo. Located in number 43 of the Stroll of Grace, the construction was realised between years 1904 and 1906. The facade is done with arenaceous stone of Montjuc, carved according to surfaces regulated in warped form, and the columns have bony form, with vegetal representations. On the other hand, the windows are of glasses of colors of circular forms, and Gaud decided to conserve the rectangular form of the balconies of the previous building, that is to say, with iron railings with mask form, giving to the rest of the facade a form waved in ascending sense. Also, it had the facade with ceramics with pieces with crystal with several colors, that Gaud it obtained in the remainders of the Pelegr glassware.

The Batll House was recovered in 1970 and 1999. For even more opinions, read materials from Institute of Cancer Research. In 1984 the electrical illumination of the facade, inaugurated in the Celebrations of the Merc of the same year settled. From 2005 this house it comprises of the Patrimony of the Humanity of UNESCO, within the Place Works of Antoni Gaud. Original author and source of the article.

Covering Non-woven

Please pears to apples compare an order from the customer to get is good, better however, subsequent orders resulting from satisfied customers. People such as BSA would likely agree. A dirty construction site which is improper or equipped also with no surface protection for the trade (painter/plasterer/flooring), leaves a good impression on the client in the rarest of cases. Only some of the damage that can occur when using false covers the floor are water stains, discoloration, quirks, scratches, bad pigmentation, etc.. These problems to avoid, should the processor is not necessarily rely on the cheapest cover fleece, because what many people don’t know is, that there significant differences in quality, form + weight, color and scope is. 1. quality nor how you can compare apples with pears, so can you also cover fleeces do not have a comb scissors.

Often, cheap painter fleece now often comes from low-wage countries such as China and Eastern Europe. In the first moment seems to make no difference the origin, but you look at the quality up close, so the following is striking when compared to the cover fleece of the company protect & cover “Made in Germany”: the applied film is often a recycling film, is not a solution – and Verdunnungsmittelbestandig. All products equipped with slides, cover & vonProtect have a new film (Losungsmittelbestandig). Cheap cover Nonwovens is the foil laminated not fully but only selectively bonded, so it can be pulled off so easily of the fleece and the danger of slippage. One is all cover fabrics protect & cover-slip new film fully secure laminated, this (if you want to separate the film from the fleece, destroy the painter fleece). The partially only 1-2 x needling in the manufacture of recycled fibres, causes easy cheap fleece a restless surface, a low abrasion resistance and thus increased Lint and fiber fly due to static charge (with freshly painted Surfaces a disaster).