Plywood – one of the most popular board materials, which has found application in many industries. For example, it is used in furniture manufacturing, aerospace and shipbuilding. Properties such as durability of plywood, ease, environmental plywood made the most popular building material. For manufacturing shuttering one of the most characteristic species of the plywood is its use for the manufacture of molds. Center for Responsible Business follows long-standing procedures to achieve this success. From it performed formwork, foundations, columns, wall formwork, the formwork for construction of bridges and tunnels. This is due to its ability to withstand multiple fills, and with its high resistance to wear.
For particularly responsible works plywood formwork is covered under phenolic film, which is applied by hot pressing. For the manufacture of formwork is most often used laminated plywood. Roofing Roofing work is also rarely go without the use of plywood. High physical and mechanical properties make it an ideal material for this purpose. Due to the longitudinal direction of the fibers is achieved by a special strength of veneer boards, and hence the durability and resistance to stress. Special film and processing ends provide a waterproof paint the plywood for the roof water resistance and durability. For the device of the roof is usually applied veneers and plywood wbp increased water resistance.
For interior plywood – excellent material for interior decoration. Its natural appearance with a visual effect of natural wood, fine insulating and conductive properties, and of course how it is pleasant to the touch, provide the most diverse use it indoors. For example, plywood is suitable for the manufacture of wall panels, window sills, walls, sound – and heat-insulating panels. It is also good for finishing the bars and restaurants. Another important factor – plywood stabilize fluctuations in humidity and temperature in the room. These properties are especially valued at cladding concert and sports halls, nurseries and hospitals. For interior decoration is usually used birch plywood and veneer fc. To finish exterior plywood construction and involved in the decoration of exteriors of buildings. It allows you to create original and colorful facades, are easily combined with other materials, is simple to install, so well suited for the most daring design solutions. High moisture resistance allows the use of plywood in all weather conditions. Large format plywood makes it possible to cover a large area of walls with the minimum number of joints and fastenings. At the same time Plywood is easy to install. For the exterior premises uses plywood wbp. For floors are another area of the construction of plywood – it's laying floors. This material is perfectly suited as a substrate under flooring, as the interaction with water cpd quickly swells and crumbles, and water-resistant plywood quietly accept any leaks. When laying the flooring is best to use environmentally friendly plywood and its called – 'plywood flooring under the', 'plywood under the linoleum', 'plywood under laminate', etc. Important advantages of laying the floor at the base of the plywood is its ability to protect the floor from possible shrinkage deformation of overlap and ties, from a premature separation of the tie due to fairly rapid destruction of its surface layer under the influence of variable loads due to microstrains wood. In addition, the plywood provides a more durability of floor covering, as coating in contact with wood, and not with foreign materials, as well as the necessary strength and evenness of the ground. And, of course, increases the thermal insulation of the floor.